- Leader discharge lightning rods, used for all kinds of buildings direct lighting protection.
- Under same height conditions, the protection area is larger than ordinary lightning rods.
- Adopt advanced technology, and material, with excellent acid-proof, corrosion-proof effect.
- With strong wind bearing ability.
- Rod part is made from special material, with stronger air termination withstand capacity.
- Simple construction, convenient installation.
Lightning rod's protection zone should be calculated according to standard stipulated rolling sphere method. If the lightning conductor does not meet the requirement, it can adopt special rail or tower to increase the height; If the protection area is wide, it can consider to using several lightning conductors to cover protection area.
Points for attention:
- when you install the lightning rods, every parts should be connected tight.
- After installation, if there is damage in connection parts or metal parts, it needs to arrange rust-proof treatment.
- Lightning conductors should be grounding through down-conductors.
- It needs to check the lightning rods all parts' connection conditions, grounding resistance before rain season every year.
| Operating temperature |
-40~+80 degree |
| Relative humidity |
≤ 95% |
| Operating environment |
Outdoor |
| Height (L) |
1.0(m) |
| Max. Diameter of the rod (M) |
Φ 20(mm) |
| Diameter of Flange (T) |
φ 240(mm) |
| Thickness of Flange |
8(mm) |
| Fixup orifice of Flange |
φ 10(mm)x 4 |
| Weight |
4(Kg) |
| Housing material |
Stainless steel |
| Max. impulse current Iimp |
300 kA |
| wind bearing |
40(m/s) |
| No. of main rod |
1 |
Audited Supplier 
){kind=link}
){kind=link}