| Customization: | Available |
|---|---|
| Type: | Signal Type Arrester |
| Application: | signal system |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Surge protective device for Signal System
|
Products |
100-megabit network lightning protection |
Gigabit network lightning protection |
PoE network lightning protection |
|
Model |
FS-RJ45-E100 |
FS-RJ45-E1000 |
FS-RJ45-PoE |
1. Product introduction
Products installed in the computer network port, for network line lightning and surge protection
Standard module structure for 35mm electrical rail installation
Meet the requirements of lightning protection and electrical characteristics of Ethernet signal lines
Two-stage composite discharge design, discharge current is large, fast response, low residual voltage
Install in series,RJ45 interface
Mainly used in 100M, 1000M and PoE network equipment
2. Product size
4. Technical specifications
|
Model |
FS-RJ45-E100 |
FS-RJ45-E1000 |
FS-RJ45-PoE |
||
|
Maximum continuous operating voltage |
Uc |
6V- |
|||
|
Maximum continuous operating current |
IL |
-- |
1A |
||
|
Nominal discharge current (@8/20µs) |
Line/Line |
In |
2kA |
30A |
|
|
Line/PE |
2kA |
2kA |
|||
|
Voltage protection level (@ In) |
Line/Line |
Up |
≤15V |
≤15V |
|
|
Voltage protection level (@1kV/µs) |
Line/Line |
Up |
≤10V |
≤10V |
|
|
Line/PE |
≤450V |
≤550V |
|||
|
Response time |
Line/Line |
tA |
≤1ns |
≤1ns |
|
|
Line/PE |
≤100ns |
≤100ns |
|||
|
The data transfer rate |
Vs |
100Mbit/s |
1000Mbit/s |
1000Mbit/s |
|
|
The number of protection lines |
-- |
RJ45(1,2,3,6) |
RJ45(1,2,3,4,5,6,7,8) |
RJ45(1,2,3,4,5,6,7,8) |
|
|
Operating temperature |
-- |
-40ºC~+80ºC |
|||
|
Enclosure material |
-- |
Flame retardant plastic |
|||
|
Degree of enclosure protection |
-- |
IP20 |
|||
5. Product installation
IEnvironmental requirements
1. Operating temperature:-40ºC~+80ºC
2. Operating humidity:≤90% (@25ºC)
3. Non-flammable and explosive environment
4. Avoid sunlight and rain
Installation instructions
1. The appliance should be installed at the back end of the breakers F1, close to the power switch or protected equipment
2. The product ground wire is connected in parallel to the power line
3. Product wiring should be 2.5 square or more copper wire, wiring as short, thick, straight as possible
4. Check the mineproof box indicators regularly to make sure the equipment is working properly
Company Information
FATECH ELECTRONIC CO., LTD., is located in Guangdong Provincial New Light Production Base, CHINA, which is a professional manufacturer on R&D and producing on lightning and surge protection devices. Our company gathered all kinds of high-skillled personnels, including authority technical experts and professionals, and excellent technicians with more than 10 years experience. Wide range of lighting & surge protection products assured you a one stop shopping location for all your need and professional technical support,warmly welcome your visit and audit our factory.
Workshop
Fatech has gathered authority technical experts and professionals as technical advisers and 50% production workers have more than 5 years working experience of surge protection products. Also we established an advanced independent test center with variety of testing equipmet, including reliability testing laboratory, environmental aging testing laboratory, release testing laboratory.
Exhibition
FATECH have strong sales team, our surge protection device are sold to many countries around the world. mainly in Europe, Asia, Latin-America, and Middle East. We would like to cooperate with global customers and help you success in your market.
Certifications
FATECH Electronic (FOSHAN) CO., LTD. supplies five-years warranty on surge protective devices, and supply maintenance services in lifetime.Products are certified with TUV, CE; UL pending, 90% material are UL approved.
FAQ:
1. Q: Could l know which advantages do you have please?
A: Independent test center, TUV, Patent certifications; 15 years export experience in the overseas market; good technical service and support.
2. Q: Are you a lightning surge protectors factory or trading company?
A: We area manufacturer which is ISO 9001-2008 quality system on R&D, production and sales of surge arrester.
3. Q: Warranty and return?
A: We supply five-years warranty on surge protective devices and own the best after-sale service team, if any
problem happens, our team will do our best to solve it for you.
4. Q: What's the delievery time?
A: It is usually about 15 days after receiving the payment and confirmed the order, but specific time should
be based on the order quantity.
){kind=link}