| Customization: | Available |
|---|---|
| Type: | Meidum |
| Application: | Tall Tower |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Lightning Rod FLR-03/3 Characteristic
2. Lightning Rod FLR-03/3 Electrical parameters
3. Lightning conductor FLR-03/3 1350mm Installation
To install a ESE lightning conductor must strictly follow the standard IEC/TC81 61024
-- "building lightning protection design code"
- According to the protected area, building height, application place lightning
strike days and geographical environment, building use properties to
determine the building lightning protection category.
-According to the lightning protection category and building area, to
select one or two pieces pre-discharge lightning rod.
-Down conductor must be connected two building's main reinforcement,
or to arrange two or more than two pieces down conductor according to
the provisions.
-Down conductor should be disconnected card and in the vicinity of
the ground insulation protection.
-Grounding, grounding resistance shouldbe executed in accordance with the requirements of IEC/TC81 61024.
| Model NO.:FLR-03/3 | ||
| Wind bearing | 40m/s | |
| Housing material | Stainless steel | |
| Fixup orifice of flange | 10mm*4 | |
| Thickness of Flange | 8mm | |
| Diameter of Flange (T) | 240mm | |
| Max. Diameter of the rod (M) | 20mm | |
| Operating environment | outdoor | |
| Relative humidity | <=95% | |
| Height (L) | 950mm | |
| Weight | 4kg | |
| Max implus current limp | 300KA |
){kind=link}